Skip to content

Solar Charger Victron SmartSolar MPPT Tr 150/100 VECan 12-48V 100A SCC115110411

by Victron
Original price $1,300.00 - Original price $1,300.00
Original price
$1,300.00
$1,300.00 - $1,300.00
Current price $1,300.00
SKU SCC115110411

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks.

The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

MPPT: Ultra fast maximum power point trackingThe MPPT VE.Can SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model. The charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium and others.
 

Control your charger remotely- The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data. 

Daisy chain additional units- The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy chained” to each other with a single RJ45 cable between the individual units. When connected to each other, all individual VE.Can SmartSolar chargers, will synchronise their charge stages. They can also send their data, via a single cable, to a GX monitoring device. 

 Remote monitoring & controlIf the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s).
 

SmartSolar control display (optional extra)The VE.Can SmartSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single unit monitoring or for streetlight control. The remote on/off connector can be externally controlled by a third-party device like a lithium battery. An optional plug-in LCD display/control provides live-data, set-up and management, straight from the face of the device.

Ultra-fast maximum power point tracking (MPPT)Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
 

Advanced maximum power point detection in case of partial shading conditionsIf partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. 
 

Outstanding conversion efficiency- No cooling fan. Maximum efficiency exceeds 98%. 
 

Flexible charge algorithm- Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see Manual for details). 
 

Extensive electronic protection- Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. 
 

Bluetooth Smart built-in- The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
 

 Internal temperature sensor and optional external battery voltage and temperature sensing via BluetoothA Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
 

VE.Can: the multiple controller solution- Up to 25 units can be synchronised with VE.Can 
 

VE.Direct or VE.Can - For a wired data connection to a Color Control GX, other GX products, PC or other devices
 

Remote on-off & programmable relay To connect for example to a VE.BUS BMS. Can be programmed to trip on an alarm, or other events

Extras:

 Victron VE.Direct Cable 1.8m ASS030530218
Victron VE.Direct to USB Interface ASS030530010

 

 

 

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
Caitlin Duryea
Great product, great customer service

Ive only had this running for a week now but so far so good, easy to install
No hesitations buying from this company again standout customer service